According to 33 CFR Part 156, during annual...

Study

Question 1 of 205eccef9cbacbc34ba4d45c59

According to 33 CFR Part 156, during annual inspection, each nonmetallic oil transfer hose which is tested, must not burst, bulge, leak, or abnormally distort under a static liquid pressure of __________.

Back

Question 1 of 20

5eccef9cbacbc34ba4d45c59

No comments yet

Be the first to share your thoughts!

If the question has a related picture, it will appear here.

🔍 Key Concepts

• 33 CFR Part 156 requirements for hose testing during oil transfer operations • Meaning of maximum allowable working pressure (MAWP) for a hose • Why safety factors are used in pressure testing (test pressure vs normal operating pressure)

💭 Think About

• Look at whether the test pressure should be higher, lower, or equal to the normal working pressure of the hose • Consider which option represents a built-in safety margin that inspectors would want to verify • Ask yourself: which choice sounds like a precise regulatory standard rather than a vague operational condition?

✅ Before You Answer

• Verify in 33 CFR Part 156 the exact phrase related to static liquid pressure for hose tests • Check whether the regulation links the test pressure to maximum allowable working pressure (MAWP) or to relief valve settings • Confirm that the requirement applies specifically to each nonmetallic oil transfer hose during annual inspection

👋 Hi! I'm Genie, your AI study assistant. How can I help you with this question?

Quick actions

— No credit card needed