In the marine gas turbine engine shown in...

Study

Question 1 of 2066636eed28f7522a1c51e0dd

In the marine gas turbine engine shown in the illustration, the HP turbine 2nd stage nozzle vanes are cooled by which of the following? Illustration GT-0020

Back

Question 1 of 20

66636eed28f7522a1c51e0dd

In the marine gas turbine engine shown in the illustration, the HP turbine 2nd stage nozzle vanes are cooled by which of the following? Illustration GT-0020

No comments yet

Be the first to share your thoughts!

If the question has a related picture, it will appear here.

🔍 Key Concepts

• Trace the labeled cooling-air flow lines in the GT-0020 diagram specifically around the HP turbine 2nd stage nozzle vanes area. • Notice which compressor bleed (9th, 13th, or 16th stage) is routed toward the high‑temperature turbine section versus being sent to customer bleed or frame vent. • Distinguish between air used for frame venting / sump pressurization and air used for nozzle and blade cooling.

💭 Think About

• Starting at the HP turbine 2nd stage nozzle region, which color‑coded line and label feed directly into that part of the turbine? • Compare where the 9th, 13th, and 16th stage bleed lines terminate— which one actually enters the turbine nozzle area rather than leaving the engine as customer bleed or going to frame vents? • Is any of the air first used for another purpose (such as thrust balance or customer bleed) before it reaches the 2nd stage nozzles, or does one bleed supply them directly?

✅ Before You Answer

• Verify the exact label printed next to the line that enters the 2nd stage nozzle vane region—match that wording to one of the answer choices. • Confirm that the line you are following does not end at a label such as Frame Vent or Customer Bleed, which would rule out that option. • Double‑check that you are looking at the HP turbine 2nd stage, not the 1st stage or LP turbine, to avoid mixing up cooling sources.

👋 Hi! I'm Genie, your AI study assistant. How can I help you with this question?

Quick actions

— No credit card needed

Question 1 of 20

In the marine gas turbine engine shown in the illustration, the HP turbine 2nd stage nozzle vanes are cooled by which of the following? Illustration GT-0020

Frame vent bleed air.

9th stage compressor air.

13th stage compressor air.

16th stage compressor air.

Loading interactive features...

Study

Question 1 of 2066636eed28f7522a1c51e0dd

In the marine gas turbine engine shown in the illustration, the HP turbine 2nd stage nozzle vanes are cooled by which of the following? Illustration GT-0020

Back

Question 1 of 20

66636eed28f7522a1c51e0dd

In the marine gas turbine engine shown in the illustration, the HP turbine 2nd stage nozzle vanes are cooled by which of the following? Illustration GT-0020

No comments yet

Be the first to share your thoughts!

If the question has a related picture, it will appear here.

🔍 Key Concepts

💭 Think About

✅ Before You Answer

👋 Hi! I'm Genie, your AI study assistant. How can I help you with this question?

Quick actions

— No credit card needed