Which of the listed systems related to an...

Question 1 / 205eccefa5bacbc34ba4d4889a

Question 1 of 205eccefa5bacbc34ba4d4889a

Which of the listed systems related to an engineer's signal alarm panel is required to be indicated by a continuously illuminated light while in operation?

Back

Question 1 of 20

5eccefa5bacbc34ba4d4889a

Which of the listed systems related to an engineer's signal alarm panel is required to be indicated by a continuously illuminated light while in operation?

No comments yet

Be the first to share your thoughts!

If the question has a related picture, it will appear here.

🔍 Key Concepts

• Difference between alarm indications (which attract attention when something is wrong) vs status indications (which show equipment is running/energized)** • Engine room practices for monitoring steering gear motors, including local and remote indication of their operating condition • What types of conditions (e.g., high bilge level, low lube oil pressure, low tank level) are usually shown as momentary/flash alarms instead of steady ‘running’ lights

💭 Think About

• Ask yourself: Which of these conditions is something you need to know is continuously in operation, rather than only when there is a fault? • Think about which of these would more logically be indicated on a bridge or engine control console as a running status light instead of just a fault alarm. • For each option, decide: is this primarily a fault/abnormal condition alarm or a normal-operation status indication?

✅ Before You Answer

• Identify which option represents a normal operating condition that needs continuous indication, not just an abnormal alarm. • Eliminate choices that clearly describe fault conditions (e.g., low level, high level, low pressure) that would only trigger when something is wrong. • Recall that continuous illumination usually means “equipment running/energized,” while audible/visible alarm typically signals a fault. Match each option to one of these patterns before choosing.

👋 Hi! I'm Genie, your AI study assistant. How can I help you with this question?

Quick actions

— No credit card needed

Question 1 of 20

Which of the listed systems related to an engineer's signal alarm panel is required to be indicated by a continuously illuminated light while in operation?

Deaerating tank low level

Shaft alley bilge high level

Port or starboard steering gear motor running

No. 1 diesel generator low lube oil pressure

Loading interactive features...

Question 1 / 205eccefa5bacbc34ba4d4889a

Question 1 of 205eccefa5bacbc34ba4d4889a

Which of the listed systems related to an engineer's signal alarm panel is required to be indicated by a continuously illuminated light while in operation?

Back

Question 1 of 20

5eccefa5bacbc34ba4d4889a

Which of the listed systems related to an engineer's signal alarm panel is required to be indicated by a continuously illuminated light while in operation?

No comments yet

Be the first to share your thoughts!

If the question has a related picture, it will appear here.

🔍 Key Concepts

💭 Think About

✅ Before You Answer

👋 Hi! I'm Genie, your AI study assistant. How can I help you with this question?

Quick actions

— No credit card needed