Which is the requirement on small passenger...

Study

Question 1 of 2066636ee728f7522a1c5189a2

Which is the requirement on small passenger vessels for each inlet or discharge pipe penetrating the hull less than six inches above the deepest load waterline?

Back

Question 1 of 20

66636ee728f7522a1c5189a2

Which is the requirement on small passenger vessels for each inlet or discharge pipe penetrating the hull less than six inches above the deepest load waterline?

No comments yet

Be the first to share your thoughts!

If the question has a related picture, it will appear here.

🔍 Key Concepts

• 46 CFR Subchapter T requirements for small passenger vessels • The purpose of fittings on hull penetrations near the waterline (flooding prevention) • Differences between types of valves (globe valve vs gate valve vs general shutoff/means to prevent water entry)

💭 Think About

• Focus on what the regulation is trying to prevent when a pipe that goes through the hull fails close to the load waterline. • Ask yourself whether the regulation specifies one particular valve type or allows any arrangement that achieves a safety function. • Consider which choice sounds like a specific hardware type versus a more general safety requirement that could be satisfied in multiple ways.

✅ Before You Answer

• Verify in 46 CFR Part 182 (or applicable small passenger vessel construction section) what is required for hull penetrations near the deepest load waterline. • Check whether the rule names a specific valve design (globe or gate) or simply requires a means to prevent water from entering the vessel if the pipe or fitting fails. • Confirm that engine exhausts are treated differently in the regulation from ordinary inlet/discharge piping.

👋 Hi! I'm Genie, your AI study assistant. How can I help you with this question?

Quick actions

— No credit card needed

Study

Question 1 of 2066636ee728f7522a1c5189a2

Which is the requirement on small passenger vessels for each inlet or discharge pipe penetrating the hull less than six inches above the deepest load waterline?

Back

Question 1 of 20

66636ee728f7522a1c5189a2

Which is the requirement on small passenger vessels for each inlet or discharge pipe penetrating the hull less than six inches above the deepest load waterline?

No comments yet

Be the first to share your thoughts!

If the question has a related picture, it will appear here.

🔍 Key Concepts

💭 Think About

✅ Before You Answer

👋 Hi! I'm Genie, your AI study assistant. How can I help you with this question?

Quick actions

— No credit card needed