Which is the BEST holding ground for...

Question 1 / 2707066636ee728f7522a1c517586

Question 1 of 2707066636ee728f7522a1c517586

Which is the BEST holding ground for conventional anchors?

Back

Question 1 of 27070

Q

Which is the BEST holding ground for conventional anchors?

If the question has a related picture, it will appear here.

🔍 Key Concepts

• How conventional anchors (stockless, stock, Danforth) create holding power in the seabed • Differences between hard mud, very soft mud, rock, and shale as bottom types • Why anchors need to dig in and form a stable "plug" of bottom material around the flukes

💭 Think About

• For each bottom type listed, ask yourself: Will the anchor’s flukes be able to penetrate and then stay buried under load? • Which bottom type is most likely to let the anchor dig in deeply without either skating on top or pulling out too easily? • Consider which seabed material commercial anchoring guides commonly recommend as the preferred holding ground for stockless and Danforth-type anchors.

✅ Before You Answer

• Eliminate any bottom where flukes are likely to skid or drag on the surface instead of digging in • Eliminate any bottom where the anchor might sink too deeply and not develop firm resistance • Focus on the option that balances good penetration with strong shear resistance in the soil around the flukes

Question 1 of 27070

Q

Which is the BEST holding ground for conventional anchors?

A

Shale

B

Hard mud

C

Very soft mud

D

Rock

Loading interactive features...

Question 1 / 2707066636ee728f7522a1c517586

Question 1 of 2707066636ee728f7522a1c517586

Which is the BEST holding ground for conventional anchors?

Back

Question 1 of 27070

Q

Which is the BEST holding ground for conventional anchors?

If the question has a related picture, it will appear here.

🔍 Key Concepts

• How conventional anchors (stockless, stock, Danforth) create holding power in the seabed • Differences between hard mud, very soft mud, rock, and shale as bottom types • Why anchors need to dig in and form a stable "plug" of bottom material around the flukes

💭 Think About

• For each bottom type listed, ask yourself: Will the anchor’s flukes be able to penetrate and then stay buried under load? • Which bottom type is most likely to let the anchor dig in deeply without either skating on top or pulling out too easily? • Consider which seabed material commercial anchoring guides commonly recommend as the preferred holding ground for stockless and Danforth-type anchors.

✅ Before You Answer

• Eliminate any bottom where flukes are likely to skid or drag on the surface instead of digging in • Eliminate any bottom where the anchor might sink too deeply and not develop firm resistance • Focus on the option that balances good penetration with strong shear resistance in the soil around the flukes