When you "end for end" a wire rope, you...

Question 1 / 2707066636ee728f7522a1c517a85

Question 1 of 2707066636ee728f7522a1c517a85

When you "end for end" a wire rope, you __________.

Question 1 of 27070

When you "end for end" a wire rope, you __________.

🔍 Key Concepts

• wire rope maintenance and wear along the length of the rope • difference between the free end and the bitter end on a drum or winch • how to extend the service life of a wire rope without cutting or splicing

💭 Think About

• What part of a wire rope usually wears out first when it runs over sheaves or a fairlead from a drum? • If you want to use the less‑worn section of the rope, how could you change its position relative to the drum without shortening the rope? • Which option actually changes which end of the same rope is working at the most highly stressed point, instead of changing its length or adding another rope?

✅ Before You Answer

• Make sure you know which end is called the bitter end versus the free end on a winch drum or reel. • Check which choices involve cutting or splicing the rope versus simply changing its orientation or position. • Confirm which option would put the previously idle or less‑used end of the same wire rope into the main working area.

Question 1 of 27070

When you "end for end" a wire rope, you __________.

splice two wire ropes together

cut off the free end and bitter end of the rope

remove the wire rope from the drum and reverse it so that the free end becomes the bitter end

remove the wire rope from the drum and turn it over, so the wire bends in the opposite direction

Question 1 / 2707066636ee728f7522a1c517a85

Question 1 of 2707066636ee728f7522a1c517a85

When you "end for end" a wire rope, you __________.

Back

Question 1 of 27070

When you "end for end" a wire rope, you __________.