When working around deck machinery it is a...

Question 1 / 205eccef9ebacbc34ba4d461d0

Question 1 of 205eccef9ebacbc34ba4d461d0

When working around deck machinery it is a good safety practice to avoid standing in a 'bight' of a rope because __________.

Back

Question 1 of 20

5eccef9ebacbc34ba4d461d0

When working around deck machinery it is a good safety practice to avoid standing in a 'bight' of a rope because __________.

No comments yet

Be the first to share your thoughts!

If the question has a related picture, it will appear here.

🔍 Key Concepts

• Bight of a line – what it means and where it forms in a rope • Common deck machinery hazards: pinch points, snap-back, and sudden loading of lines • Basic line-handling safety: where you should and should not stand when lines are under tension

💭 Think About

• Think about what could happen to your body if a line that is slack suddenly comes under heavy tension while you are standing inside a loop or curve of it. • Which choice describes an immediate physical danger to you, not just a problem with how the line is handled or stored? • On a real deck with winches or capstans, what is the worst-case scenario if a line runs out or surges while you are standing in its path?

✅ Before You Answer

• Identify which option involves a direct risk of injury to the person, not damage to equipment or rope. • Check which choice matches what you’ve heard about snap-back zones and staying clear of running gear. • Eliminate any answers that only talk about line management (neatness, coiling, faking) instead of personal safety.

👋 Hi! I'm Genie, your AI study assistant. How can I help you with this question?

Quick actions

— No credit card needed

Question 1 of 20

When working around deck machinery it is a good safety practice to avoid standing in a 'bight' of a rope because __________.

it doesn't allow for proper faking of the line

the coil may become tangled and difficult to manage

a sudden yank on the line may trap your leg

your work shoes may cause damage to the rope

Loading interactive features...

Question 1 / 205eccef9ebacbc34ba4d461d0

Question 1 of 205eccef9ebacbc34ba4d461d0

When working around deck machinery it is a good safety practice to avoid standing in a 'bight' of a rope because __________.

Back

Question 1 of 20

5eccef9ebacbc34ba4d461d0

When working around deck machinery it is a good safety practice to avoid standing in a 'bight' of a rope because __________.

No comments yet

Be the first to share your thoughts!

If the question has a related picture, it will appear here.

🔍 Key Concepts

💭 Think About

✅ Before You Answer

👋 Hi! I'm Genie, your AI study assistant. How can I help you with this question?

Quick actions

— No credit card needed