Question 1 of 2921866636eee28f7522a1c51ee2f

What is the normal direction of flow through the device shown in the illustration while operating in the processing mode? Illustration GS-0153

Back
Back
Back
Question 1 of 29218
Study area:
Study area:
Q

What is the normal direction of flow through the device shown in the illustration while operating in the processing mode? Illustration GS-0153

No Illustration

This question does not have an illustration

🔍 Key Concepts

• Follow the flow path arrows in the separator tank module from the pump discharge to the outlet connection. • Identify which numbered valve is on the inlet/suction side of the pump module and which is on the clean water discharge side. • Remember that in processing mode, the separator sends clean water to the overboard/clean bilge line and retains or returns the oil.

💭 Think About

• Looking at the separator tank module, which numbered connection is lowest and most likely to be the outlet for processed water? • Trace the piping from the pump module: from which numbered valve does the oily-water mixture first enter the separator, and at which numbered valve does the flow leave after passing through the coalescer packs? • Compare each answer choice with the actual physical piping shown: which choices incorrectly place the inlet at a point that appears to be a vent, overflow, or return rather than a main inlet?.

✅ Before You Answer

• Verify which number label is located at the bottom side connection of the separator tank (this is typically the processed water outlet). • Confirm which numbered valve is directly connected to the inlet line from the pump module (look for the dashed line connection). • Make sure the chosen flow direction matches a realistic separator design: oily-water mixture in near the upper side, processed water out near the lower side.