What is the configuration Thrane & Thrane...

Question 1 / 270709ZAZwwWfC2pjG6OSo6JA

Question 1 of 270709ZAZwwWfC2pjG6OSo6JA

What is the configuration Thrane & Thrane F500 for standard voice telephone operation?

Question 1 of 27070

What is the configuration Thrane & Thrane F500 for standard voice telephone operation?

🔍 Key Concepts

• Difference between RJ11 ports (analog telephone interfaces) and ISDN ports (digital data/voice interfaces) on the Thrane & Thrane F500 • What the 3.1 kHz setting is typically used for versus a standard voice setting • How a standard analog telephone physically connects to the F500 system

💭 Think About

• Ask yourself: does a normal household/shipboard analog telephone plug into an RJ11 jack or an ISDN port on most satcom systems? • Consider whether 3.1 kHz is more commonly associated with special services like fax/data or with everyday voice calls. • Look at the wording: if you want ordinary voice telephone use, which option most clearly matches both the physical port type and the voice mode you would expect?

✅ Before You Answer

• Verify which port type on the F500 is specifically intended for connecting standard analog telephones (RJ11 vs ISDN). • Confirm what service the 3.1 kHz setting on the F500 is normally configured for (fax/data vs standard voice). • Match the correct port type to the appropriate voice configuration that says "standard voice" for routine telephone calls.

Question 1 of 27070

What is the configuration Thrane & Thrane F500 for standard voice telephone operation?

RJ11 Port 1 and 2 set to 3.1 kHz.

RJ11 Port 1 and 2 set to standard voice.

ISDN Port set to 3.1 kHz.

ISDN Port 1 and 2 set to standard voice.

Question 1 / 270709ZAZwwWfC2pjG6OSo6JA

Question 1 of 270709ZAZwwWfC2pjG6OSo6JA

What is the configuration Thrane & Thrane F500 for standard voice telephone operation?

Back

Question 1 of 27070

What is the configuration Thrane & Thrane F500 for standard voice telephone operation?