To properly use a clamp-on type ammeter to...

Question 1 / 270705eccefa3bacbc34ba4d47f93

Question 1 of 270705eccefa3bacbc34ba4d47f93

To properly use a clamp-on type ammeter to check current flow, what must be done FIRST?

Question 1 of 27070

To properly use a clamp-on type ammeter to check current flow, what must be done FIRST?

🔍 Key Concepts

• How a clamp-on ammeter measures current (magnetic field around a conductor) • Difference between series connection and non-contact (clamp) measurement • Why only one conductor should be inside the clamp for an accurate reading

💭 Think About

• Think about whether a clamp-on ammeter must be wired into the circuit, or if it works without breaking the circuit • Consider what the clamp (jaws) actually go around and why the insulation matters • Ask yourself what step must happen before any reading or calibration can make sense with this type of meter

✅ Before You Answer

• Verify whether a clamp-on ammeter requires the circuit to be energized or de-energized to read current • Check if current measurement with this type of meter is done by the jaws around a single conductor, not by test leads in series • Confirm that shorting test leads and zeroing is usually associated with conventional ammeters or ohmmeters, not clamp-only current measurement

Question 1 of 27070

To properly use a clamp-on type ammeter to check current flow, what must be done FIRST?

short the test leads and calibrate the instrument to zero

de-energize the circuit to allow connection of the instrument in series

hook the jaws of the instrument around the insulated single conductor

connect the voltage test leads to the appropriate terminals

Question 1 / 270705eccefa3bacbc34ba4d47f93

Question 1 of 270705eccefa3bacbc34ba4d47f93

To properly use a clamp-on type ammeter to check current flow, what must be done FIRST?

Back

Question 1 of 27070

To properly use a clamp-on type ammeter to check current flow, what must be done FIRST?