The vacuum drag line for the main condenser...

Question 1 / 270705eccef9cbacbc34ba4d45742

Question 1 of 270705eccef9cbacbc34ba4d45742

The vacuum drag line for the main condenser is specifically connected in which area?

Question 1 of 27070

The vacuum drag line for the main condenser is specifically connected in which area?

🔍 Key Concepts

• How a main condenser works to condense exhaust steam from the turbine • Where non‑condensable gases (air) tend to collect inside a condenser • The purpose of a vacuum drag line and air ejector system

💭 Think About

• Think about which part of the condenser is most likely to accumulate air and non‑condensable gases rather than condensate water. • Ask yourself: where should you connect a line that is supposed to remove air to maintain vacuum—directly where steam enters, where it’s mostly condensed, or where air tends to collect? • Consider the flow path of steam through the condenser: entry, travel over tubes, condensation, and collection of condensate—at which point are gases least dense vs. most likely to be trapped?

✅ Before You Answer

• Identify which choice describes a location where air and non‑condensable gases would naturally gather rather than where condensate is collected. • Eliminate any option that is clearly associated with liquid condensate storage rather than gas removal. • Verify which areas are primarily for heat exchange (tubes) vs. gas removal vs. condensate collection inside a main condenser.

Question 1 of 27070

The vacuum drag line for the main condenser is specifically connected in which area?

main tube bank

the steams first point of entry

the end of the steam lane

lower portion of the hot well

Question 1 / 270705eccef9cbacbc34ba4d45742

Question 1 of 270705eccef9cbacbc34ba4d45742

The vacuum drag line for the main condenser is specifically connected in which area?

Back

Question 1 of 27070

The vacuum drag line for the main condenser is specifically connected in which area?