The purpose of the component labeled "F" in...

Question 1 / 270705eccef9dbacbc34ba4d45d35

Question 1 of 270705eccef9dbacbc34ba4d45d35

The purpose of the component labeled "F" in the illustration is to___________. See illustration GS-0163.

Back

Question 1 of 27070

The purpose of the component labeled "F" in the illustration is to___________. See illustration GS-0163.

If the question has a related picture, it will appear here.

🔍 Key Concepts

• Study where label F is located relative to the cargo level and the tank top head • Think about how a pneumatic / aerated dry-bulk tank controls pressure and monitors loading • Compare fittings that look like pressure or level taps versus those that look like air inlets or outlets

💭 Think About

• If this component were meant to protect the slope sheets, where would you expect it to be located, near the top or near the bottom of the tank? • Does the position of F suggest it is measuring something inside the tank, or venting something from the tank? • Which function would be most important right at the upper boundary between the aerated material and the tank’s air space?

✅ Before You Answer

• Verify on the side-view which components actually enter the tank headspace versus those that go down into the material • Note whether F is above, at, or below the normal cargo surface line in the sketch • Ask which choice best matches a small tapping or connection at that vertical position in a pressurized dry-bulk tank

Question 1 of 27070

The purpose of the component labeled "F" in the illustration is to___________. See illustration GS-0163.

determine the level of remaining pulverized material

prevent damage to the slope sheets

bleed excess air from the top of the tank

maintain a minimum of 15 psia difference between the aeration unit and the top head

Question 1 / 270705eccef9dbacbc34ba4d45d35

Question 1 of 270705eccef9dbacbc34ba4d45d35

The purpose of the component labeled "F" in the illustration is to___________. See illustration GS-0163.

Back

Question 1 of 27070

The purpose of the component labeled "F" in the illustration is to___________. See illustration GS-0163.

If the question has a related picture, it will appear here.