The DEEP DRILLER is loaded as shown in the...

Question 1 of 2921866636ef128f7522a1c522684

The DEEP DRILLER is loaded as shown in the Sample Load Form #4 (Drilling). What would be the weight of the mud in pit #4 if the sounding level changed from 8 to 6 feet?

Back

Question 1 of 29218

The DEEP DRILLER is loaded as shown in the Sample Load Form #4 (Drilling). What would be the weight of the mud in pit #4 if the sounding level changed from 8 to 6 feet?

🔍 Key Concepts

• Sounding levels and volume: How a change in fluid depth in a rectangular pit changes the total volume of fluid. • Weight per unit volume (density): Converting from volume of mud in the pit to long tons using data on the load form. • Sample Load Form #4 (Drilling): How to read the table for "Mud Pit #4" (capacity per foot, or total capacity at a given depth).

💭 Think About

• Look at Mud Pit #4 on Sample Load Form #4. How is the mud weight or capacity given there? Is it in long tons per foot of depth, or total capacity at a specific depth? • If the sounding drops from 8 ft to 6 ft, what is the change in depth? How many feet of mud were removed? • Once you know how many long tons per foot are in Mud Pit #4, how many long tons correspond to a 2‑ft change in sounding?

✅ Before You Answer

• Verify exactly what unit the pit capacity is listed in on the load form (e.g., "LT/ft of depth", "bbl/ft", or total LT at a given depth). • Confirm whether you are asked for the weight removed (difference between 8 and 6 ft) or the remaining weight at 6 ft. Read the question wording carefully. • Be sure you are working in long tons, not metric tons or short tons, and that any barrel‑to‑ton conversion on the form is correctly applied.