The clutch band of a constant tensioning...

Question 1 / 270705eccef9cbacbc34ba4d45ae6

Question 1 of 270705eccef9cbacbc34ba4d45ae6

The clutch band of a constant tensioning mooring winch must be set up tight enough to drive the winch drum and should slip only when ______.

Back

Question 1 of 27070

The clutch band of a constant tensioning mooring winch must be set up tight enough to drive the winch drum and should slip only when ______.

If the question has a related picture, it will appear here.

🔍 Key Concepts

• Constant tensioning mooring winch – why it uses a clutch band and what its safety function is • Relationship between clutch slippage and protecting equipment/lines from overload • Normal vs emergency/overload operating conditions of a mooring winch

💭 Think About

• Think about what the purpose of a constant tensioning system is: is it mainly about speed, convenience, or protection from dangerous forces on the line? • When would you WANT the clutch band to slip instead of continuing to drive the drum—under light load, normal load, or when something abnormal is happening? • Which option best reflects a built‑in safety feature to prevent damage to the winch, the line, or the ship’s fittings?

✅ Before You Answer

• Identify which choice clearly involves abnormally high or potentially dangerous loads on the winch or mooring line • Eliminate any choice that suggests slipping during normal, desired operation instead of as a safety response • Ask: In real life, during mooring, when would uncontrolled continued pulling be most hazardous and therefore when should the clutch be set to let go/slip?

Question 1 of 27070

The clutch band of a constant tensioning mooring winch must be set up tight enough to drive the winch drum and should slip only when ______.

automatic operation of the winch is desired

minimum pull is being exerted by the winch

excessive loads are placed on the winch

wire is being retrieved at the maximum rate

Loading interactive features...

Question 1 / 270705eccef9cbacbc34ba4d45ae6

Question 1 of 270705eccef9cbacbc34ba4d45ae6

The clutch band of a constant tensioning mooring winch must be set up tight enough to drive the winch drum and should slip only when ______.

Back

Question 1 of 27070

The clutch band of a constant tensioning mooring winch must be set up tight enough to drive the winch drum and should slip only when ______.

If the question has a related picture, it will appear here.