In the illustrated schematic, which...

Study

Question 1 of 2066636eee28f7522a1c51eb96

In the illustrated schematic, which component is the device that was used to replace the six-way valve, as found on many older type steering gears? Illustration GS-0123

Back

Question 1 of 20

66636eee28f7522a1c51eb96

In the illustrated schematic, which component is the device that was used to replace the six-way valve, as found on many older type steering gears? Illustration GS-0123

No comments yet

Be the first to share your thoughts!

If the question has a related picture, it will appear here.

🔍 Key Concepts

• Study how older six-way steering valves functioned: they directed hydraulic oil from the telemotor to either port or starboard side of the power unit and had a neutral/stop position. • On the schematic, look for the main directional control element that sends oil to port or starboard ram chambers depending on helm order – this is the modern replacement for the old six‑way valve. • Notice which labeled component is directly linked in the circuit between the control/telemotor section and the power cylinders/rudder actuator; that interface component is the key.

💭 Think About

• Which labeled item appears to be the central directional valve block for the system, rather than a pump, relief valve, or safety/isolating valve? • Trace the flow paths from the control units toward the rudder actuator: at which labeled component do the lines branch to port vs starboard sides of the steering cylinders? • Compare the complexity: a six‑way valve has multiple ports and spool lands; which chosen label encloses a multi‑port spool valve assembly instead of a simple check or solenoid valve?

✅ Before You Answer

• Verify which label is located in the main pressure line just upstream of the steering cylinders, not off to the side like alarms or bypass devices. • Confirm the component you pick has multiple work ports (at least four) plus supply and return, consistent with the function of a six‑way valve. • Make sure the option you select is not just an electric solenoid manifold or a pump/motor symbol, but the primary hydraulic directional control element.

👋 Hi! I'm Genie, your AI study assistant. How can I help you with this question?

Quick actions

— No credit card needed

Study

Question 1 of 2066636eee28f7522a1c51eb96

In the illustrated schematic, which component is the device that was used to replace the six-way valve, as found on many older type steering gears? Illustration GS-0123

Back

Question 1 of 20

66636eee28f7522a1c51eb96

In the illustrated schematic, which component is the device that was used to replace the six-way valve, as found on many older type steering gears? Illustration GS-0123

No comments yet

Be the first to share your thoughts!

If the question has a related picture, it will appear here.

🔍 Key Concepts

💭 Think About

✅ Before You Answer

👋 Hi! I'm Genie, your AI study assistant. How can I help you with this question?

Quick actions

— No credit card needed