In order to take suction on the lube oil...

Question 1 / 2066636eee28f7522a1c51eefa

Question 1 of 2066636eee28f7522a1c51eefa

In order to take suction on the lube oil drain tank cofferdam with the bilge pump shown in the illustration, how many suction side valves must be open? Illustration GS-0042

Back

Question 1 of 20

66636eee28f7522a1c51eefa

In order to take suction on the lube oil drain tank cofferdam with the bilge pump shown in the illustration, how many suction side valves must be open? Illustration GS-0042

No comments yet

Be the first to share your thoughts!

If the question has a related picture, it will appear here.

🔍 Key Concepts

• Follow the suction piping from the lube oil drain tank cofferdam all the way to the bilge pump suction inlet on the GS-0042 diagram. • Notice where the suction line joins a bilge/ballast suction manifold and whether there is a separate tank isolation valve plus a manifold suction valve. • Distinguish carefully between suction-side valves and discharge-side valves on the bilge pump symbol.

💭 Think About

• Starting at the lube oil drain tank cofferdam, how many valve symbols must liquid pass through before it reaches the bilge pump casing? • Does the suction line from the cofferdam go directly to the pump, or does it first connect into a common manifold that itself has a suction valve at the pump? • Are there any valves drawn on branches that are not actually in the active flow path when you are pumping from the cofferdam to overboard or to another destination?

✅ Before You Answer

• Verify you are only counting valves that are upstream of the pump (on the suction side), not those on the discharge or overboard line. • Confirm whether the cofferdam connection has its own dedicated isolation valve in addition to any manifold valves. • Double-check that each valve symbol you count is actually in series in the line from the cofferdam to the pump, not in parallel or on a different branch.

👋 Hi! I'm Genie, your AI study assistant. How can I help you with this question?

Quick actions

— No credit card needed

Question 1 of 20

In order to take suction on the lube oil drain tank cofferdam with the bilge pump shown in the illustration, how many suction side valves must be open? Illustration GS-0042

One

Two

Three

Four

Loading interactive features...

Question 1 / 2066636eee28f7522a1c51eefa

Question 1 of 2066636eee28f7522a1c51eefa

In order to take suction on the lube oil drain tank cofferdam with the bilge pump shown in the illustration, how many suction side valves must be open? Illustration GS-0042

Back

Question 1 of 20

66636eee28f7522a1c51eefa

In order to take suction on the lube oil drain tank cofferdam with the bilge pump shown in the illustration, how many suction side valves must be open? Illustration GS-0042

No comments yet

Be the first to share your thoughts!

If the question has a related picture, it will appear here.

🔍 Key Concepts

💭 Think About

✅ Before You Answer

👋 Hi! I'm Genie, your AI study assistant. How can I help you with this question?

Quick actions

— No credit card needed