In a typical hydraulic system, return lines...

Study

Question 1 of 205eccef9cbacbc34ba4d45936

In a typical hydraulic system, return lines to the reservoir are terminated below the normal oil level to prevent __________. foaming of the oil condensation of warm oil vapors upon return

Back

Question 1 of 20

5eccef9cbacbc34ba4d45936

In a typical hydraulic system, return lines to the reservoir are terminated below the normal oil level to prevent __________. foaming of the oil condensation of warm oil vapors upon return

No comments yet

Be the first to share your thoughts!

If the question has a related picture, it will appear here.

🔍 Key Concepts

• Hydraulic reservoir design and purpose of the return line location • Effects of agitation and air entrainment on hydraulic oil (foaming) • What causes condensation in tanks or reservoirs

💭 Think About

• Ask yourself: When oil returns from the system, is it usually warmer or cooler than the oil in the reservoir, and how would that affect vapor or condensation? • Think about what happens if the return oil splashes into the reservoir from above the surface versus being discharged below the surface. • Consider whether terminating the line below the oil level directly affects moisture in the air space of the tank, or mainly affects how the oil itself behaves.

✅ Before You Answer

• Verify which problem is most directly linked to splashing and air mixing in the reservoir. • Consider whether condensation is usually an oil-surface/splash issue or an air-space/temperature issue in tanks. • Check standard hydraulic texts: does submerged return piping get mentioned as a cure for foaming, condensation, or both?

👋 Hi! I'm Genie, your AI study assistant. How can I help you with this question?

Quick actions

— No credit card needed

Study

Question 1 of 205eccef9cbacbc34ba4d45936

In a typical hydraulic system, return lines to the reservoir are terminated below the normal oil level to prevent __________. foaming of the oil condensation of warm oil vapors upon return

Back

Question 1 of 20

5eccef9cbacbc34ba4d45936

In a typical hydraulic system, return lines to the reservoir are terminated below the normal oil level to prevent __________. foaming of the oil condensation of warm oil vapors upon return

No comments yet

Be the first to share your thoughts!

If the question has a related picture, it will appear here.

🔍 Key Concepts

💭 Think About

✅ Before You Answer

👋 Hi! I'm Genie, your AI study assistant. How can I help you with this question?

Quick actions

— No credit card needed