How is the illustrated strainer element...

How is the illustrated strainer element...

Question 1 of 2707066636eef28f7522a1c51fce6

How is the illustrated strainer element cleaned during engine operation? Illustration MO-0057

Question 1 of 27070

Q

How is the illustrated strainer element cleaned during engine operation? Illustration MO-0057

No Illustration

This question does not have an illustration

🔍 Key Concepts

• Observe what happens inside the housing when the T-handle at “A” is turned, especially the movement of the internal discs/scrapers. • Notice where the dirt and debris end up (near “B”) and how flow arrows show liquid still passing through the strainer during this action. • Compare options that require shutting down and disassembling the strainer versus options that allow cleaning while still in operation.

💭 Think About

• Which component in the illustration appears designed to move and scrape or dislodge debris from the strainer element without taking it apart? • If the engine must keep running, which methods (from the choices) would realistically allow cleaning without interrupting flow through the strainer? • How do the arrows around labels C and D help you understand how the strainer surface is being cleared while liquid continues to flow?

✅ Before You Answer

• Verify which action uses the T-handle shown at the top of the illustration and what internal parts it turns. • Check whether any choice would require opening the housing or removing the element – would that still allow engine operation? • Confirm from the diagram that the normal cleaning method causes debris to fall toward the drain at B, while flow continues through the element.