The line labeled "C", as shown in the...

Question 1 of 31048fy_heal_CREATE_q808_2027

The line labeled "C", as shown in the illustration, would be identified as the ______. Illustration GS- 0175

Back

Question 1 of 31048

The line labeled "C", as shown in the illustration, would be identified as the ______. Illustration GS- 0175

No Illustration

This question does not have an illustration

🔍 Key Concepts

• Difference between clean water and oily water lines in an oily water separator or bilge system • Where a tank drain usually connects versus where an inlet or discharge connects in a piping diagram • Direction of flow arrows and how labels like "overboard" or "to bilge" are usually shown

💭 Think About

• Look at where line C starts and where it ends: is it coming from a tank, going to a tank, or going overboard? • Ask yourself what the purpose of each type of line would be in this system: which one would normally lead toward an overboard discharge, and which would lead back into the bilge or a waste tank? • Compare line C to any strainers, pumps, or valves in the illustration: is this line on the suction side, discharge side, or at the low point of a tank?

✅ Before You Answer

• Verify whether line C is connected directly to the tank bottom, which is typical for a drain line • Check any direction arrows or text labels near line C (such as "from bilge," "to sea," or "to tank") to see what function it serves • Confirm whether line C ties into the overboard discharge side of the system or into the suction/inlet side from the bilge