For the DEEP DRILLER, it is recommended that...

Question 1 of 2707066636ef128f7522a1c5223a8

For the DEEP DRILLER, it is recommended that the number of lower-hull ballast tanks with free surfaces be less than __________.

Back

Question 1 of 27070

Study area:

For the DEEP DRILLER, it is recommended that the number of lower-hull ballast tanks with free surfaces be less than __________.

No Illustration

This question does not have an illustration

🔍 Key Concepts

• Free surface effect in ballast tanks and its impact on stability • Recommended operational limits for simultaneous slack tanks in lower hulls of mobile offshore drilling units (MODUs) • Why lower-hull ballast management is more critical than upper-hull or column tanks on units like DEEP DRILLER

💭 Think About

• Think about how each additional slack ballast tank with a free surface changes the unit’s metacentric height (GM) and overall stability. • Ask yourself: for a lower-hull MODU, would class/operating recommendations aim for a small number or a large number of tanks with free surface at any one time? • Consider typical safe-practice guidance: how many slack tanks can be tolerated before free surface becomes a serious concern in heavy weather or during operations?

✅ Before You Answer

• Verify that you understand that more slack tanks = more free surface effect = reduced stability. • Focus on the fact that the question is about lower-hull ballast tanks, not all ballast tanks on the unit. • Before choosing, compare the options and ask which represents a conservative operational limit consistent with good MODU stability practice.