At least one reinspection shall be made on...

Study

Question 1 of 2066636ef128f7522a1c52211d

At least one reinspection shall be made on each vessel holding a Certificate of Inspection valid for two years. This inspection shall be held between the tenth and fourteenth months of the duration period of the certificate. Which describes the scope of the annual inspection?

Back

Question 1 of 20

66636ef128f7522a1c52211d

No comments yet

Be the first to share your thoughts!

If the question has a related picture, it will appear here.

🔍 Key Concepts

• 46 CFR Subchapter T/S depending on vessel type – inspection intervals and scope • Difference between original certification inspection and annual/reinspection • How much detail is normally required once a vessel is already in service and classed as satisfactory

💭 Think About

• Ask yourself: once a vessel has already met all standards for the Certificate of Inspection, does the follow‑up inspection usually repeat every detail, or verify continued compliance more generally? • Consider whether the regulations would allow the inspector to reduce or expand the scope purely at personal discretion, or whether the rule sets a standard pattern for what an annual inspection covers. • Think about the purpose of an annual inspection: is it to fully recertify from scratch or to confirm that the vessel is still up to the already‑established standard?

✅ Before You Answer

• Check whether the regulation uses wording like “equivalent to” or “generally similar to” when comparing annual inspections to original certification inspections. • Verify if the rule gives the OCMI/inspector full discretion over the scope or just over specific items needing closer examination. • Confirm whether the annual inspection is described as being in more detail, same detail, or less detail than the full certification inspection.

👋 Hi! I'm Genie, your AI study assistant. How can I help you with this question?

Quick actions

— No credit card needed