As shown in figures "B" and "C" of the...

Study

Question 1 of 205eccefa3bacbc34ba4d47f67

As shown in figures "B" and "C" of the illustration, what should be the switch position and which test lead terminal jacks should be used if your intent is test a diode using the diode test function?

Back

Question 1 of 20

5eccefa3bacbc34ba4d47f67

As shown in figures "B" and "C" of the illustration, what should be the switch position and which test lead terminal jacks should be used if your intent is test a diode using the diode test function?

No comments yet

Be the first to share your thoughts!

If the question has a related picture, it will appear here.

🔍 Key Concepts

• Carefully match the diode symbol shown on the display (Panel A) with the measurement function number in the table (Panel B). • Use the table in Panel B to find which switch position number corresponds to that diode measurement function. • Look at Panel C to see which jacks are labeled for V / Ω / diode versus those labeled for current (mA / A).

💭 Think About

• On Panel A, which numbered indicator corresponds to the diode symbol, and what measurement function number does that give you? • In Panel B, for that same measurement function number, which switch position is listed in the left column? • In Panel C, which pair of jacks would you normally use when measuring voltage, resistance, or diodes, and which one is always the common (COM) connection?

✅ Before You Answer

• Verify you have correctly identified the diode symbol on the display in Panel A before looking at the table. • Confirm that the switch position number you choose in Panel B actually lists the same measurement function number as the diode symbol from Panel A. • Double‑check in Panel C that you are NOT using the mA or A current jacks, but the pair intended for V / Ω / diode and COM.

👋 Hi! I'm Genie, your AI study assistant. How can I help you with this question?

Quick actions

— No credit card needed

Study

Question 1 of 205eccefa3bacbc34ba4d47f67

As shown in figures "B" and "C" of the illustration, what should be the switch position and which test lead terminal jacks should be used if your intent is test a diode using the diode test function?

Back

Question 1 of 20

5eccefa3bacbc34ba4d47f67

As shown in figures "B" and "C" of the illustration, what should be the switch position and which test lead terminal jacks should be used if your intent is test a diode using the diode test function?

No comments yet

Be the first to share your thoughts!

If the question has a related picture, it will appear here.

🔍 Key Concepts

💭 Think About

✅ Before You Answer

👋 Hi! I'm Genie, your AI study assistant. How can I help you with this question?

Quick actions

— No credit card needed