As required by 46 CFR, Subchapter J...

As required by 46 CFR, Subchapter J...

Question 1 of 270705eccefa4bacbc34ba4d48581

As required by 46 CFR, Subchapter J (Electrical Engineering), the illustrated ground detection system shown in figure "B" is appropriate for which type of electrical distribution system? See illustration EL-0008.

Question 1 of 27070

Q

As required by 46 CFR, Subchapter J (Electrical Engineering), the illustrated ground detection system shown in figure "B" is appropriate for which type of electrical distribution system? See illustration EL-0008.

No Illustration

This question does not have an illustration

🔍 Key Concepts

• Ungrounded vs grounded systems in 46 CFR Subchapter J (Electrical Engineering) • How ground detection lamps are connected in 1-phase vs 3-phase systems • What the figure label "3 Ph AC" and the absence/presence of a neutral point imply about the type of distribution system

💭 Think About

• Look carefully at how many phase conductors are shown in figure B and how each ground detection lamp is connected. Does this match a single-phase, DC, or three-phase layout? • Is there a solidly grounded or high-impedance neutral shown anywhere in figure B, or is the lamp system tied to a common point that is only grounded through the test pushbutton? What does that tell you about whether the system is grounded or ungrounded? • Compare figure B with figures A and C. How does the simplicity/complexity of the lamp connections help you decide whether this is a basic ungrounded system or a more specialized grounded-neutral or transformer-based detector?

✅ Before You Answer

• Confirm the figure B legend at the top (e.g., "3 Ph AC") and count the number of phase conductors feeding the lamps. • Verify whether any conductor or neutral is permanently grounded in the diagram, versus only being momentarily grounded through the test pushbutton switch. • Match the figure B arrangement to the description of an ungrounded three‑wire versus single‑phase or DC system in 46 CFR Subchapter J ground detection requirements (verify in current regulations).