Among the valves on the DEEP DRILLER which may be opened when using the Salt-Water Service Pump to pump water into Tank 1P is __________.
• Salt-Water Service Pump suction and discharge lines on the DEEP DRILLER piping diagram • Proper valve lineup for filling a specific tank (Tank 1P) from a particular pump • How valve numbers on the exam diagram correspond to line direction, branch points, and isolation valves
• Trace the flow from the Salt-Water Service Pump discharge toward Tank 1P on the piping diagram and identify every valve in that path. • Ask yourself which valves MUST be open for water to reach Tank 1P, and which valves, if opened, would instead send water to another tank or overboard. • Check whether the valve in the correct path is a branch, isolation, or overboard valve, and whether opening it would prevent or allow flow to Tank 1P.
• Verify on the diagram which side of each numbered valve (33, 36, 46, 48) is connected directly or indirectly to Tank 1P. • Confirm that the chosen valve is on the discharge side of the Salt-Water Service Pump, not on a suction or unrelated line. • Make sure that opening the chosen valve does not divert flow away from Tank 1P to another destination such as another tank or overboard.
No comments yet
Be the first to share your thoughts!