According to 46 CFR Part 61, which of the...

Study

Question 1 of 205eccef9ebacbc34ba4d466f6

According to 46 CFR Part 61, which of the following machinery remote control shutdowns is/are required to be tested during each regular inspection for certification?

Back

Question 1 of 20

5eccef9ebacbc34ba4d466f6

According to 46 CFR Part 61, which of the following machinery remote control shutdowns is/are required to be tested during each regular inspection for certification?

No comments yet

Be the first to share your thoughts!

If the question has a related picture, it will appear here.

🔍 Key Concepts

• 46 CFR Part 61 – particularly the sections dealing with tests and inspections of machinery, equipment, and systems • The meaning of remote control shutdowns for machinery on steam or motor vessels • Which pieces of machinery, when they fail or overspeed, directly affect boiler furnace draft and fuel supply

💭 Think About

• Which of the listed items would most directly affect the safe operation of the boiler and combustion process if it could not be shut down remotely? • Does Part 61 focus on every fuel‑related pump on the vessel, or specifically on equipment tied to boiler/engine room safety systems? • When the Coast Guard speaks of required machinery shutdown tests at each inspection, which of these items are normally included in the safety trip and remote shutdown checklist?

✅ Before You Answer

• Check 46 CFR Part 61 sections that list required tests of remote operating and safety devices for boilers and machinery • Verify which of the listed items (forced draft fan, induced draft fan, fuel oil transfer pump) are specifically named in those test requirements • Confirm whether the regulation groups these together or lists only certain fans/pumps associated with combustion air and fuel supply

👋 Hi! I'm Genie, your AI study assistant. How can I help you with this question?

Quick actions

— No credit card needed

Study

Question 1 of 205eccef9ebacbc34ba4d466f6

According to 46 CFR Part 61, which of the following machinery remote control shutdowns is/are required to be tested during each regular inspection for certification?

Back

Question 1 of 20

5eccef9ebacbc34ba4d466f6

According to 46 CFR Part 61, which of the following machinery remote control shutdowns is/are required to be tested during each regular inspection for certification?

No comments yet

Be the first to share your thoughts!

If the question has a related picture, it will appear here.

🔍 Key Concepts

💭 Think About

✅ Before You Answer

👋 Hi! I'm Genie, your AI study assistant. How can I help you with this question?

Quick actions

— No credit card needed