A ruptured boiler tube should be removed by...

Question 1 of 270705eccefa0bacbc34ba4d46cab

A ruptured boiler tube should be removed by __________. splitting the remaining tube sections with a safety ripping chisel cutting out most of the tube and then allowing the remaining portion to disintegrate as the boiler is normally fired

Back

Question 1 of 27070

🔍 Key Concepts

• Boiler tube failure hazards (what can go wrong if metal fragments remain in the boiler path) • Proper mechanical removal methods vs. methods that rely on continued firing/operation • Manufacturer/USCG/ABS expectations for safe maintenance practices on pressure vessels

💭 Think About

• Think about which method gives you the most positive control over the damaged tube and any loose pieces during removal. • Ask yourself whether it is ever considered good practice to let damaged pressure‑part metal "burn out" or "disintegrate" while the boiler is in normal service. • Consider how each method affects the risk of secondary damage to drums, headers, other tubes, and the risk to personnel.

✅ Before You Answer

• Verify whether safe boiler work usually requires the unit to be secured, cooled, and opened up before tube removal. • Consider if normal firing with a damaged tube left in place could cause flying debris, overheating, or distortion of nearby parts. • Compare: which option reflects a controlled mechanical maintenance procedure, and which sounds like using operation itself as a removal tool.